Ping K15 Irons wholesale golf clubs 20110222

ourth, the original limit of shaft Ping K15 Irons

Can follow, the principle of cheap manufactured products Ping K15 Driver look like? Into any golf shop, pick up a tee or fairway woods can be found in wood. They are definitely less than the maximum of 60 a few grams, and some Japanese brands did even a few grams of 40. Relatively soft in his hand shaken, can clearly feel the shaft in the swing. Even if the bar who printed FUJIKURA, DIAMANA. Do not forget that manufacturers of products is supplied by the lowest bidder out of raw materials provided. Independent shaft manufacturers have produced a few grams of 40, 50 a few grams, but they are independent shaft manufacturers with the same starting line did not.

The first major flaw original shaft is torque. Ping G10 Irons Big head like a watermelon in the same era, the head rotation axis center of gravity farther and farther away from the shaft, making the bar in the process of becoming more open club face angle, hit a ball back is also increasingly face difficult. This shortcoming has led to the right hand curve balls, on the other hand increases the scattering rate. According to a recent U.S. GOLF LAB robot test results Ping G15 Driver, the scattering of some of the original shaft striking differences are more than 50 yards, the winner is even more to reach 59 yards. Independent shaft manufacturers have the greatest difference between the scattering of no more than 30 yards, this is generally beyond the original shaft at a distance of 20 yards or longer. The smallest difference is only 5.9 yards scattering. Independent shaft products victory. Although independent shaft more expensive, but for people who play the 3000 block of grass, ponds and fairways of 5000 which is more important?

The second major flaw is the original shaft shaft design. So that their clubs can fit "any person" in the requirements for club shaft manufacturers supporting shaft, they give up a lot of performance indicators. The original end of the shaft are soft, so the design is to ensure that even very Ping G15 Irons slow swing speeds who are bent enough to allow shaft to provide release of the rebound (Kick). The disadvantages of doing so is that if there was a golfers swing speed faster than the average person a few words, if he does not send power to change habits, his ball will always be the right song, but how much. Original shaft end not only soft, middle and front is also very soft. Soft, middle to further rebound. The result is a direct result of energy transfer efficiency decreased. The soft front is to have a greater rotation, let the ball fly higher. After all, most golfers are faced with the problem be unlikely the ball, not ball too high. In addition, in order to meet the needs of manufacturers on price, the shaft will not use any vendor-end materials, the effect is not expected. Wholesale Golf Clubs

The third major flaw is the original shaft of poor stability. As for the supporting shaft manufacturers is the need to mass production, manufacturers will naturally not QC indicators, stability will be relatively poor. The weight difference is mainly reflected in the stability of instability, the hardness of instability in different parts of the head, shaft torque instability and so on. In addition to weight indicators, other indicators will be the flight trajectory of the ball more or less negative impact. ooobgolfclubs

Ping K15 Irons