Menu



error This forum is not active, and new posts may not be made in it.
1
Ali
Ali Aba

0
155 Posts
155
Invite Me as a Friend
Ping K15 Irons 20110219 wholesale golof clubs
2/19/2011 2:46:39 AM
Ping K15 Irons 20110219 wholesale golof clubs
Ping K15 Irons 20110219 wholesale golof clubs

Shaft

  The original club, the shaft of choice is a single, independent shaft manufacturers a wide variety of products, it is easy for you seeing things. One thing is certain, regardless of the shaft used in the original use of which brand of OEM shaft, the retail brand of the same type Ping K15 Irons used in some better performance than the original. This is industry "open secret" Needless to say, in the final analysis is still a cost. If conditional, must take the original shaft into an independent brand of the shaft for you, you will get a higher stability, longer distances and more optimal take-off trajectory. The performance of the bend point shaft, weight and torque. Turning point trajectory generated low-high, low break point to produce high trajectory. The higher the weight, the higher the relative stability, but the impact of swing speed. The lower torque, more stable club, especially in the non-sweet spot of your racket time. Select shaft when the Ping G15 Irons shaft must pay attention to select the appropriate hardness.

  1, shaft hardness

  Shaft hardness of the first principle is to choose - you can control the selection of the most soft-clubs, to produce maximum distance. For example, if your swing speed just at the junction of R and S, then the best choice for R shaft. Of course, if you seek absolute control Ping Rapture V2 Irons of the distance does not matter, you can limit access to select S. Also affect the speed of the swing rhythm of the performance of the shaft, if you swing fast pace, it is relatively hard to choose some of the shaft. If you have a slower swing tempo, then also need to select some of the more soft. The domestic market, the common shaft hardness of men selected as R and S. U.S. rules and regulations are at the points. In general, the rules of the club at the same hardness in the case of identity than the U.S. standard of soft. If you swing slower pace, you can choose day regulation of the R shaft. Otherwise, consider the S. If the United States rules the club, swing speed at 105MPH below, choose R on it. TAYLORMADE R7 limited new products, the U.S. rules, so there is hardness of the Asian products identified as M, if the swing speed and swing rhythm generally slow, it should select the hardness of M products.

  2, torque

  Shaft torque can be simply understood as the shaft's torsional capacity. With the increased size of the club, ball an instant, the head of the torque applied to the shaft is also growing. Therefore, manufacturers have begun to select the torque of the smaller products. However, the wholesale golf clubs original shaft torque and stability of the shaft still can not be compared with independent brands. In the choice, prefer the smaller torque products. The smaller torque, when the deviation from the sweet spot of your racket, the shaft the less reverse, the ball crooked can not be so much, and vice versa.

  3, weight

  Common wood shaft weight of roughly 5x, 6x, 7x, 8x grams of this interval. In theory, the lighter the shaft, allowing the faster swing speed, so that many Japanese are in the club shaft about 50 grams, and most of the women are also in this range shot, and even lighter. Although the light shaft allows you to have a faster swing speed, but it can also lead to swing instability. In general, 6x grams serve wood body Ping G15 Driver weight of men choose the lower limit of the shaft. Below this weight, by cost factors, the performance of manufacturers of ultra-light shaft will be reduced. In order to improve stability, the proposed 90-100MPH swing speed in the men choose 6X shaft weight, and more than 100MPH golfers should choose 7X grams of product. Do not worry about re-shaft will affect your swing speed, 10 grams of weight on swing speed is minimal.

  4, the shaft turning point

  Shaft turning point can be divided into low, medium and high three. Turning point is when the club forces the maximum curvature point. Turning point trajectory generated low-high, low break point to produce high trajectory. Turning point will have some impact trajectory, the choice of the shaft when the trajectory according to their choice of departure, or to listen to professional advice.

  5, club length

  The last point is the length of the club. The height between 170-180 people in under normal circumstances serve for the length of wood 43 inches to 44.5 inches between. PGA TOUR players average height is 5 feet 11 inches (about 180 cm), and they use wood mostly serve 44 or 44.5 inches. Are commercially available 45-inch club length from the general, the length of terms for most golfers is too long. The length of the swing is Ping K15 Driver too long will lead to poor stability, quality shots will also be affected, thereby affecting the direction and distance of the ball. Purchase of commercial clubs, the best it immediately to the appropriate length of the truncated, including Fairway. Many golfers think that the club will have shorter swing speed after impact, which is correct. From a physical point of view, slower swing speed will do, but just slow down a little bit of it. But the shorter the club can make it easier to hit the sweet spot, easier to control the club. So often you get more distance.

Second, Fairway Woods and Iron (small chicken)

  To save space, we only talk about the choice fairway woods, iron, wood and wood serve different points.

  1, angle and distance ooobgolfclubs

[Image: 157_G_1289491335958.jpg]
+0
1


facebook
Like us on Facebook!