error This forum is not active, and new posts may not be made in it.
Kevin Paul

19 Posts
Invite Me as a Friend
Canon Printer Error P07: Don't Panic! Here's How to Fix It
10/31/2023 12:04:37 PM
Canon printers are renowned for their exceptional print quality and reliability. However, like all electronic devices, they may occasionally encounter errors. One such error is the Canon Printer Error P07. In this blog, we’ll explore what this error means and provide step-by-step guidance on how to fix it so you can get your Canon printer back up and running quickly.

Understanding Canon Printer Error P07

Canon Printer Error P07 is a standard error code that typically appears on the LED display of your Canon printer. This error indicates an issue related to the ink absorber, a sponge-like pad that absorbs excess ink during the printing process. When the ink absorber is full or needs resetting, the printer displays Error P07 as a warning.

Critical reasons for Error P07:

1. Ink Absorber Full: Over time, the ink absorber pad may become saturated with excess ink, causing the printer to display the P07 error.

2. Ink Absorber Counter Needs Reset: Sometimes, the ink absorber is incomplete, but the printer’s internal counter suggests it is. Resetting this counter can help resolve the issue.

How to Fix Canon Printer Error P07

Let’s go through the steps to resolve Canon Printer Error P07:

Step 1: Check for Obvious Issues

Before diving into the more involved solutions, make sure you’ve checked for these common issues:

- Ensure the printer is powered on without displaying any other error messages.
- Confirm there are no paper jams or obstructions inside the printer.
- Verify that the ink cartridges are correctly installed and have enough ink.

Step 2: Reset the Ink Absorber Counter

To reset the ink absorber counter, follow these steps:

1. Turn off the printer and unplug it from the power source.

2. Press and hold the “Resume” or “Stop/Reset” button on the printer (usually a red triangle or an orange circle with an inverted triangle inside it).

3. While holding the button, reconnect the printer to the power source.

4. Hold the button for about 5 seconds, then release it.

5. The printer should enter service mode, indicated by the LED display showing “0.”

6. Press the “Resume” or “Stop/Reset” button four more times. The LED display will cycle through different numbers and letters.

7. When the LED display shows “0,” turn off the printer and unplug it.

8. Plug the printer back in, turn it on, and the error P07 should be resolved.

Step 3: Replace the Ink Absorber

If resetting the ink absorber counter doesn’t work, it might be necessary to replace the ink absorber pad. This is a more involved process and might require professional assistance. Refer to your printer’s manual or Canon’s customer support for guidance on replacing the ink absorber.

Preventing Future Error P07

To avoid encountering Canon Printer Error P07 in the future, consider the following preventive measures:

1. Regular Maintenance: Clean the printer and its components periodically, including the printhead and the area surrounding the ink absorber.

2. Use Genuine Ink: Always use genuine Canon ink cartridges to prevent the buildup of excess ink.

3. Print Regularly: Printing regularly helps keep the ink flowing and prevents the ink absorber from becoming saturated.

Canon Printer Error P07 can be a frustrating interruption, but with these steps, you can resolve the issue and keep your Canon printer working smoothly. If you encounter persistent problems or are uncomfortable with the steps, feel free to contact Canon’s customer support or seek professional assistance to ensure the long-term health of your printer.


Like us on Facebook!